THE SIGNAL Analysis Meter is a full-featured handheld signal performance meter providing a complete signal test system in easy-to-carry protective case. Signal Analysis Meter allows choice of four pre-programmed user-selectable band plans accessed via keypad entry for easy measurement of broadcast, CATV, CATV/HRC and SUB/VHF channels. Direct-entry channel or frequency tuning selections provide maximum flexibility in head-ends and distribution networks that employ narrow digital signals or non-standard frequency applications.

The meter displays instantaneous digital signal levels when testing digital carrier levels. The large LCD screen displays signal level as a bar-graph with digital numeric readout. This backlit display provides screen illumination in dimly lit work-spaces, allowing behind rack and night meter operation. Signal Analysis Meter enables testing of carrier-to-noise, multiple channels and full, reduced, and single band scan for complete testing flexibility. The meter’s functions include not only signal measurement when AC/DC voltage is present under test, but also when selected, voltage-level display.

• Full-channel operation 5-870MHZ Frequency Range

• Four-keypad channel plans (TV, CATV/STD,CATV/HRC,SUB/VHF) enable quick switching between sources

• Single keypad frequency or channel selection provides compatibility with channel, data and other narrow bandwidth carriers

Full spectrum-analyser scan provides display of up to 100 channels simultaneously

Carrier-to-noise testing provides accurate testing of system performance anywhere in the head-end or distribution system

Large easy-to-read backlit Graphic LCD display provides quick-glance signal reference even in dimly lit work environments

AC/DC voltage readings and compatibility allow measurements through input connector, enabling signal and voltage measurements when voltage is present in tested signal without costly adapters

Eight-hour rechargeable NiMH batteries provide cost savings

Automatic power shut-off feature extends time between recharges

Bright orange high impact plastic housing and soft leatherette-vinyl protective case with belt clip included

Specifications (All the technical indexes below are under indoor temperature 25℃)

Frequency range: 5MHZ-870MHZ

Frequency resolution ratio: 10KHZ

Measured band width: 280KHZ

Level Measurement

Measurement range: -35dBmV-60dBmV

Measurement accuracy: ± 1.5dB

Resolution ratio: 0.1dB

Method of detection: Peak detection

Input resistance: 75 ohm

Carrier-noise ratio (CN)

Signal input range: ＞10dBmV

Measurement accuracy: +2dB

Voltage Measurement

Input range: 0-80V AC/DC

Measurement accuracy : ± 2V

Resolution ratio: 0.1 V

Dimensions: 4.3”(L)x 2.6”(D)x 10.0”(H)

Weight: 2 lbs